Family-Owned & Operated|Serving Hutto & Williamson County
★★★★★5-Star Google Rating
Get Free Estimate
Custom composite deck with iron railing built in central Texas
Deck Building

Custom Decks in Hutto, TX

Ground-level, elevated, and multi-level decks in pressure-treated wood, cedar, and composite. Built to code, written estimate, work guaranteed.

Deck Building Services in Hutto, TX

We build ground-level patios, attached decks, and elevated multi-level decks for homes throughout Hutto and Williamson County. Every project starts with a free site visit and written estimate. We handle permit coordination, materials, and final inspection. You don't deal with the city — we do.

Most decks in this area are attached to the back of the house and built over flat or slightly sloped yards. We set footings for the posts, frame the structure, and install the decking boards. If you want stairs, railings, or built-in benches, those go in the estimate upfront. No change orders mid-project.

Attached pressure-treated pine deck with railing Elevated deck with stairs built for central Texas home

Deck Types We Build

Ground-Level Deck

Low-profile deck sitting 12–18 inches off the ground. No railing required at this height in most jurisdictions. Ideal for flat Hutto yards.

Attached Deck

Bolted to the house's ledger board. Most common type in Hutto subdivisions. Requires permit and footings per code.

Elevated Deck

Built over a slope or second-story access. Requires deeper footings and railings at 30+ inches off the ground. We engineer it to code.

Multi-Level Deck

Two or more connected levels at different heights. Great for homes with grade changes or when you want separate spaces for dining and seating.

Freestanding Deck

Not attached to the house — its own independent structure. Good when you want a deck away from the house or over difficult framing conditions.

Pool or Spa Deck

Decking that surrounds an in-ground or above-ground pool. We use composite or pressure-treated wood that handles wet conditions and foot traffic.

Decking Materials

Three materials make up nearly every residential deck in central Texas. Here's the honest breakdown:

MaterialInstalled CostLifespanMaintenance
Pressure-Treated Pine$18–$30/sq ft15–25 yearsStain/seal every 2–3 years
Cedar$25–$40/sq ft15–25 yearsStain/seal every 2–3 years
Composite (Trex/TimberTech)$35–$55/sq ft25–30+ yearsWash once a year, nothing else

Composite costs more upfront but handles Texas heat well and requires no staining, sealing, or sanding. Pressure-treated pine is the most affordable option and works well when properly maintained. Cedar is a middle ground: more rot-resistant than pine, more affordable than composite, good-looking natural wood.

Deck Add-Ons

  • Stairs: single-run or L-shaped, with or without handrails
  • Railings: pressure-treated wood, cedar, aluminum balusters, or cable railing
  • Built-in benches: perimeter seating built into the frame
  • Lighting conduit: run conduit during framing for future low-voltage lighting
  • Pergola integration: we can frame a pergola structure directly on the deck
  • Fascia boards: trim the deck perimeter for a finished look

Permits and Code Compliance

In Hutto and most Williamson County cities, an attached deck or any deck over 30 inches off the ground requires a building permit. We pull the permit, schedule inspections, and make sure the project passes. Some ground-level freestanding decks may be exempt — we check before we start so there are no surprises.

Frequently Asked Questions

A basic pressure-treated deck runs $18–$30 per square foot installed. Cedar runs $25–$40/sq ft. Composite (Trex, TimberTech) runs $35–$55/sq ft. A 12×16 deck is about 192 sq ft — budget $3,500–$10,000 depending on material, stairs, and railings. We give you an exact number after the site visit.

Most attached decks and any deck over 30 inches off the ground require a permit in Hutto. We handle permit coordination as part of the job — you don't need to deal with the city yourself. Free-standing ground-level decks under a certain height may be exempt, but we always verify before starting.

A standard 12×16 deck takes 2–4 days once materials are on site. Larger decks, elevated builds, or projects with stairs and railings take 4–7 days. We give you a realistic timeline in writing before the project starts.

Composite decking handles Texas heat well and doesn't warp or splinter. It's also more comfortable underfoot on a hot day than untreated wood. Pressure-treated pine and cedar both work in Texas but require UV protection (staining/sealing) to prevent cracking and graying. If you want zero maintenance, go composite. If you want natural wood and are willing to maintain it, cedar is a good call.

Ready to Build Your Deck?

Free estimates for deck construction in Hutto and Williamson County. We'll come out, measure the space, and give you a written quote with no pressure.

(512) 825-7631