Family-Owned & Operated|Serving Hutto & Williamson County
★★★★★5-Star Google Rating
Get Free Estimate
Cedar pergola with attached deck built in central Texas
Pergola Installation

Custom Pergolas in Hutto, TX

Attached and freestanding pergolas in cedar, pressure-treated pine, and aluminum. Shade structures built for the Texas backyard. Free estimates throughout Williamson County.

Pergola Installation in Hutto, TX

A pergola adds usable outdoor space without fully enclosing it. The open-rafter design lets air move through while providing partial shade — typically 50 to 70 percent coverage depending on rafter spacing. It's a practical structure for a Texas backyard where you want shade but not a fully enclosed room.

We build attached pergolas that bolt to the house (most common), freestanding pergolas that stand anywhere on the property, and pergolas integrated on top of a deck. Posts go in concrete footings. Beams, rafters, and decorative trim are cut and installed on site.

Pressure-treated pine pergola over patio slab White lattice pergola installation in central Texas

Pergola Types We Build

Attached Pergola

Bolted to the house's ledger board or rim joist. Extends the roofline and creates a covered outdoor room directly off the back door.

Freestanding Pergola

Four-post structure that stands anywhere in the yard. No attachment to the house required. Good for over a patio slab or over a seating area away from the house.

Deck-Mounted Pergola

Posts bolt through the deck frame into concrete footings below. Built together with a new deck or added to an existing one.

Arbor / Entry Pergola

Smaller overhead structure for a gate entry, garden path, or yard feature. Usually 4–6 ft wide, open sides, decorative rafter tails.

Shade Sail Integration

We can install anchor hardware during framing to support shade sails or retractable shade cloth — adding coverage without a solid roof.

Polycarbonate Roof

Clear or opaque polycarbonate panels installed between the rafters for full rain protection while keeping the airy, open-structure look.

Materials

Western Red Cedar

$3,500–$8,000

12×12 to 12×16 installed. Naturally rot-resistant. Best-looking wood option. Lasts 15–25 years with basic maintenance.

Pressure-Treated Pine

$2,800–$6,500

12×12 to 12×16 installed. Most affordable. Stain within 6–12 months of install. Lasts 15–20 years.

Aluminum

$5,000–$14,000+

12×12 and up. No maintenance, no rot, no painting. Available in powder-coated colors. Best long-term option.

Cedar vs. aluminum: Cedar looks better upfront and costs less. Aluminum lasts indefinitely with zero maintenance. The right choice depends on your budget and how much time you want to spend on upkeep. We carry both and can show you examples of each at the site visit.

Add-Ons and Options

  • Ceiling fans: we run the electrical conduit during framing for a ceiling fan or pendant lighting
  • Lattice or privacy panels: add lattice or cedar board panels on one or two sides
  • Decorative rafter tails: cut curved or angled profiles on rafter ends for a custom look
  • Stain and sealer: we stain new wood pergolas at time of install
  • Shade cloth: retractable or fixed 90% shade fabric between rafters
  • String light hardware: pre-install anchor hooks for outdoor string lighting

Permits and Installation

Freestanding pergolas under a certain size are often exempt from permitting in Hutto. Attached pergolas that connect to the house structure typically need a permit. We check city requirements before starting every project — no surprises mid-build.

Installation typically takes 1 to 3 days for a standard 12×16 pergola. Larger structures or those with polycarbonate roofing take 2 to 4 days. We pour footings one day, set posts and frame the next, and finish rafters and trim last. We clean up the site completely before we leave.

Frequently Asked Questions

A cedar or pressure-treated pergola typically runs $3,500–$8,000 installed for a 12×12 or 12×16 structure. Aluminum starts around $5,000 and runs higher for larger builds. The range is wide because size, material, roof type (open rafter vs. polycarbonate), and add-ons all affect the price. We give you an exact number after the site visit.

A cedar pergola lasts 15–25 years in Texas with basic maintenance: clean it once a year and apply a UV-protective stain or sealant every 2–3 years. The posts are the most vulnerable point — set in concrete footings and kept off the soil, they hold up well. Pressure-treated pine lasts 15–20 years with similar care.

Freestanding pergolas under a certain size are often exempt from permitting in Hutto. Attached pergolas that connect to the house structure typically require a permit. We check city requirements before starting every project so there are no surprises.

A pergola has an open-top rafter roof — partial shade, full airflow. A solid patio cover has a full roof and blocks all sun and rain. We build both. If you want shade with airflow, a pergola is the right call. If you want full weather protection, a solid patio cover or screened room is what you need. We can show you examples of each at the site visit.

Ready to Add a Pergola?

Free estimates for pergola installation in Hutto and Williamson County. We'll bring material samples and walk you through your options at the site visit.

(512) 825-7631